Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

Parameter– 
map conf as dtmf

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Allows the phone to send the stored number as DTMF using the phone configured DTMF 
method when the “Conf” key is pressed. 

Boolean

0

0-1
0 (Disabled)
1 (Enabled)

map conf as dtmf: 1

Parameter– 
sip park pickup config (global)
sip lineN park pickup config 
(per line)

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Specifies the code to enter before entering the extension for where you want to park an 
incoming call. The applicable value is dependant on the type of server in the network: 
Server/Park & Pickup Values*
Asterisk 70;70;asterisk
Sylantro *98;*99;sylantro
BroadWorks *68;*88;broadworks
ININ PBX callpark;pickup;inin
*Leave “value” fields blank to disable the park and pickup feature. 

For BroadSoft BroadWorks the following syntax is applicable:

<park_code>,<park_dial_code>;<pickup_code>,
<pickup_dial_code>;broadworks

Note: 
Pauses can be introduced in the park and pick up dial codes by adding commas. Each 
comma amounts to approximate 500ms.

Alphanumeric characters

<Blank>

See applicable values in table above. 

sip lineN park pickup config: *68;*88;broadworks
or
sip park pickup config: *68,,,,,,,42;*88,,,,,,,42;broadworks