Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

You can use the following to setup and configure the IP phone:

IP phone UI

Aastra Web UI

Configuration files

The following paragraphs describe each method of configuring the IP Phone.

The IP Phone User Interface (UI) provides an easy way to access features and functions for using and configuring the IP 
phone. Access to specific features and functions are restricted to the Administrator. A User can configure a subset of 
these features and functions. Users of the IP phones should see their <Model-Specific> IP Phone User Guide for available 
features and functions.

Refer to 

, the section 

 for keys specific to your phone model.

For more information about using the hard keys on each phone, see 

, the section, 

 on 

.

For more information about the softkeys/programmable keys, see 

, the section, 

 on 

The Options key allows you to access the "Options List" on the IP phone. Accessible options in this list are for both User 
and Administrator use. The Administrator must enter a password for administrator options.

This document describes the administrator options only. For a description of the user options in the "Options List", see 
your <Model-Specific> IP Phone User Guide.

Not all parameters are available from all three methods. For more information about configuring the phone, see 

An Administrator can apply a simplified options menu to the IP phones. An Administrator can also enable and disable 
the use of an Administrator password protection in the IP phone UI. These features are configurable using the config-
uration files only. For more information about these features, see Chapter 3, the section, 

on page 

and Chapter 5, the section,

on