Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

The value of "N" for the following parameters is dependent on the number of programmable keys available on the 9143i, 
6730i, 6731i, 6735i, 6753i, 6755i, 6863i, and 6865i phone models. See the table on 

 for the applicable values. 

Available programmable key types are dependent on the IP phone model. Please refer to the resepective model’s User 
Guide for the model’s available programmable key types.

Applicable to the 6730i, 6731i, 6735i, 6753i, 6863i, and 6865i IP Phones only.

Parameter – 
prgkeyN type

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Description

The type of programmable key to configure. Valid types are:

none - Indicates key is disabled.

line - Indicates key is configured for line use.

speeddial - Indicates key is configured for speeddial use. Speeddial is applicable to 
the M670i and M675i also. You can configure a key to speeddial a specific number by 
pressing that key. Optionally, you can also configure a Speeddial key to dial prefix 
numbers. With this option, the prefix numbers automatically dial when you press 
the key, and the phone waits for you to enter the remaining numbers to dial out.
Note: When there is an active call, the Speeddial keys send DTMF digits through the 
active voice path.  To dial out, you have to first put the active call on hold and then 
press the Speeddial key.

dnd - Indicates key is configured for do not disturb on the phone. This option is "Do 
Not Disturb" in the Aastra Web UI). You must also set the DND key mode (see 

 on 

 and 

 for details).

blf - Indicates key is configured for Busy Lamp Field (BLF) use. User can dial out on a 
BLF configured key. A maximum of 50 BLFs are applicable to the M670i , and M675i 
also and a maximum of 48 BLFs are applicable to the M680i.

list - Indicates key is configured for BLF/List use. (This option is BLF/List in the Aastra 
Web UI). User can dial out on a BLF/List configured key. You can also use the 

“BLF 

List URI”

 parameter to specify a URI for the phone to access for the BLF/List.

acd - (for Sylantro Servers only) Indicates the key is configured for Auto Call Distri-
bution (called “Auto Call Distribution” in the Aastra Web UI). The ACD feature 
allows the Sylantro server to distribute calls from a queue to registered IP phone 
users (agents).

dcp - (for Sylantro Servers only) Indicates the key is configured for either Directed 
Call Pickup or Group Call Pickup (called “Directed Call Pickup” in the Aastra Web 
UI). The Directed Call Pickup/Group Call Pickup feature allows you to intercept or 
pickup a call on a monitored extension or a group of monitored extensions (This fea-
ture is not supported for the 6735i, 6737i, 6863i, 6865i, and 6867i in Release 3.3.1 
SP3).

xml - Indicates the key is configured to accept an XML application for accessing cus-
tomized XML services. You can also specify an XML key URL for this option.

flash - Indicates the key is set to generate a flash event when it is pressed, or a fea-
ture key is pressed on the CT handsets. The IP phone generates flash events only 
when a call is connected and there is an active RTP stream (for example, when the 
call is not on hold).

sprecode - Indicates the key is configured to automatically activate specific services 
offered by the server. For example, if the sprecode value of *82 is configured, then by 
pressing the key, *82 automatically activates a service provided by the server.

park - Indicates the key is configured to park incoming calls when pressed.

pickup - Indicates the key is configured to pick up parked calls when pressed.

lcr - Indicates the key is configured for “last call return” when pressed.

callforward - Indicates the key is configured for accessing the Call Forward features 
on the phone. A Call Forwarding Mode must be enabled to use this tkey. “Account” 
mode is the default.

blfxfer - Indicates the key is configured to transfer calls AND configured for BLF on 
a single key.

speeddialxfer - Indicates the key is configured to transfer calls AND configured for 
speeddialing to a specific number.

speeddialconf - Indicates the key is configured to be used as a Speeddial key AND 
as a Conference key.

speeddialmwi - Indicates the key is configured to be used as a Speeddial key for a 
voicemail account (This feature is not supported for the 6735i, 6737i, 6863i, 6865i, 
and 6867i in Release 3.3.1 SP3).

directory - Indicates the key is configured to access the Directory List.