Aastra Telecom 41-001343-02 User Manual

Page of 876
Advanced Operational Parameters
 
A-211
41-001343-02 REV04 – 05.2014
GRUU and sip.instance Support
DNS Query Setting
Parameter – 
sip gruu
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Enables or disables Globally Routable User-Agent URI (GRUU) support on the IP Phone 
according to draft-ietf-sip-gruu-15. If this parameter is disabled, parsing of inbound 
GRUU's for transfer are still enabled.
Format
Boolean
Default Value
1 (enabled)
Range
0 (disabled)
1 (enabled)
Example
sip gruu: 0
Parameter 
sip dns query type
Configuration Files
aastra.cfg, <mac>.cfg
Description
Specifies the Domain Name Service (DNS) query method to use when the IP
Phones issue requests for DNS records using one of three methods: “A” only, SRV& A, and 
NAPTR & SRV & A.
Format
Integer
Default Value
1
Range
A only - The phone issues requests for “A” (Host IP Address) records from the DNS server to 
get the IP address, and uses the default port number of 5060.
SRV & A - The phone issues requests for “SRV” (Service Location Record) records from the 
DNS server to get the port number. Most often, the IP address is included in the response 
from the DNS server to avoid extra queries. If there is no IP address returned in the response, 
the phones send out the request for “A” records from the DNS server to find the IP address.
NAPTR & SRV & A - First, the phone sends "NAPTR" (Naming Authority Pointer) lookup to get 
the “SRV” pointer and service type. For example, if Global SIP transport protocol on the 
phone is “UDP”, and Proxy server on the phone is “test.aastra.com”, then: 
If the NAPTR record is returned empty, the phone will use the default value 
“_sip._udp.test.aastra.com" for the “SRV” lookup.
If the NAPTR record is returned "test.aastra.com SIP+D2U .... _sip._udp.abc.aastra.com", 
the phone will use “_sip._udp.abc.aastra.com" for the “SRV” lookup. 
If the NAPTR record is returned "test.aastra.com SIP+D2T .... _sip._tcp.test.aastra.com", 
where the service type TCP mismatches the phone configured transport protocol “UDP”, 
the phone will ignore this value and use the default value “_sip._udp.test.aastra.com" for 
the “SRV” lookup.
Note:
The phone does not use the service type sent by the NAPTR response to switch its transport 
protocol, nor does it use the NAPTR response to determine whether to use a secure or unse-
cure communication path
The phone will always use a global sip protocol that is configured 
on the phone via configuration files or web user interface.
After performing NAPTR, the phone sends “SRV” lookup to get the IP address and port 
number. If there is no IP address in the “SRV” response, then it sends out an “A” lookup to get 
it.
Note:
On the phone side, if you configure the phone with a Fully- Qualified Domain Name (FQDN) 
proxy and specified port, the phone always sends “A only” lookups to find the Host IP 
Address of the proxy.
Example
sip dns query type: 2