Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

When a recording session is in progress, the respective IP phones display a recording icon on screen. The recording icon 
is displayed on the IP phones to indicate the recording session is active and that a duplicate copy of the RTP/SRTP 
stream is to be sent from the phone to the recording server.  The overall recording and its quality is dependent on the 
recording server and the network.

Parameter – 
recorder addressN

(N is a number from 1 to 6)

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Specifies a trusted IP address (maximum of six) corresponding to the voice recording sys-
tem. The IP phone will check and respond to SIP messages coming from these IP 
addresses on the port defined by the “sip services port” parameter.

Note:
If all of the “recorder addressN” parameters are left undefined, the active IP voice record-
ing feature is disabled.

IP Address

N/A

N/A

recorder address1: 192.168.1.20
recorder address2: 192.168.1.21
recorder address3: 192.168.1.22
recorder address4: 192.168.1.23
recorder address5: 192.168.1.24
recorder address6: 192.168.1.25

Parameter – 
recording destinationN

(N is a number from 1 to 6)

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Specifies trusted IP addresses (maximum of six) corresponding to the destination where 
the RTP/SRTP packets should be sent. The IP phone will check to see if the destination IP 
addresses are trusted before sending the duplicated RTP/SRTP packets.

Note:
If all of these parameters are left undefined, no authentication checks will be performed.

IP Address

N/A

N/A

recorder address1: 192.168.1.20
recorder address2: 192.168.1.21
recorder address3: 192.168.1.22
recorder address4: 192.168.1.23
recorder address5: 192.168.1.24
recorder address6: 192.168.1.25