Aastra Telecom 9143i Series User Manual

F-66

41-001160-03, Rev 00, Release 2.4 

IP Phone Administrator Guide

The IP phones include an attribute, “setType”, to be used with the 
AastraIPPhoneConfiguration XML object. The AastraIPPhoneConfiguration 
object allows you to make configuration changes to the phone that take affect 
immediately, without having to reboot the phone. The “setType” attribute 
enhances the ability of the AastraIPPhoneConfiguration object to override locally 
set configuration parameters, and parameters that persist across a reboot, allowing 
the user to control how the configuration parameters are saved (locally, remotely, 
or override).

The following table describes the values you can use with the “setType” attribute.

remote (default)

Allows the configuration parameters to be 
saved with the same precedence as the 
server settings. This setting does not persist 
through a reboot. 

Note: This was the behavior of the phone 
prior to Release 2.4.

Allows the configuration parameters to be 
saved with the same precedence as if you 
configured them using the IP Phone UI or 
Aastra Web UI. This setting persists 
through reboots of the phone. The only way 
to change this setting is via the IP Phone 
UI, Aastra Web UI, or another local type 
setting.

Allows the configuration parameters to be 
saved with the same precedence as server 
settings. This setting does not persist 
through a reboot and removes the local 
setting.

Draft 1