Aastra Telecom 9143i Series User Manual

3-26

41-001160-03, Rev 00, Releaes 2.4 

IP Phone Administrator Guide

Paging listen addresses

Note: This option can 
be set by both Users 
and Administrators.

paging addr list

Allows you to specify up to 5 listening multicast 
addresses to send/receive a Real Time Transport 
Protocol (RTP) stream to/from these pre-configured 
multicast address(es) without involving SIP signaling. 

For more information on this feature, see 

.

Map Redial Key To

map redial key to

Sets the Redial key as a speeddial key if a value is 
entered for this parameter. If you leave this parameter 
blank, the Redial key returns to its original 
functionality.

Note: If you configure the Redial key for speeddialing 
on the 9480i CT or 6757i CT Base Stations, the Redial 
key on the 9480i CT and 6757i CT handsets retain 
their original functionality. The Redial key on the 
handset is not configured for speeddial.

For more information on this feature, see 

 on 

Map Conf Key To

map conf key to

Sets the Conf key as a speeddial key if a value is 
entered for this parameter. If you leave this parameter 
blank, the Conf key returns to its original functionality.

Note: If you configure the Conf key for speeddialing 
on the 9480i CT or 6757i CT Base Stations, the Conf 
key on the 9480i CT and 6757i CT handsets retain 
their original functionality. The Conf key on the 
handset is not configured for speeddial.

For more information on this feature, see 

 on 

Draft 1