Aastra Telecom 9143i Series User Manual

3-70

41-001160-03, Rev 00, Releaes 2.4 

IP Phone Administrator Guide

You can configure the following Autodial settings.

N/A

Autodial Number

(Global and 
Per-Line)

sip autodial number

sip lineN autodial 
number

Globally or on a per-line basis, 
specifies the SIP phone number that 
the IP phone autodials when the 
handset is lifted from the phone 
cradle. An empty (blank) value 
disables autodial on the phone.

For more information, see Chapter 4, 

 on 

N/A

Autodial Timeout

(Global and 
Per-Line)

sip autodial timeout

sip lineN autodial timeout

Globally or on a per-line basis, 
specifies the time, in seconds, that the 
phone waits to dial a preconfigured 
number after the handset is lifted from 
the IP phone cradle. 

If this parameter is set to 0 (hotline), 
the phone immediately dials a 
preconfigured number when you lift 
the handset. If this parameter is set to 
a value greater than 0, the phone 
waits the specified number of seconds 
before dialing the preconfigured 
number (warmline) when you lift the 
handset. 

Default is 0 (hotline). 

For more information, see Chapter 4, 

 on 

N/A

Use Global Settings

(Per-line 
configurations only)

N/A

For each line, this parameter specifies 
to use the global autodial settings of 
“Autodial Number” and “Autodial 
Timeout”.

For more information, see Chapter 4, 

 on 

Draft 1