Aastra Telecom 9143i Series User Manual

41-001160-03, Rev 00, Releaes 2.4 

5-37

Configuring Operational Features

Once the language pack(s) have loaded, you must then specify which language to 
use on the phone. After the phone has booted up, you can specify which 
language(s) to use. You can use the configuration files and the IP Phone UI to 
specify the language for the IP Phone UI. You can use the Aastra Web UI to 
specify the files for the Aastra Web UI. 

Use the following procedures to specify the language to use on the IP phone.

For specific parameters you can set in the configuration files, see Appendix A, the section, 

page A-162 

and

 “Language Pack Settings”

 on 

If you specify the language to use on the phone via the 

configuration files, you must reboot the phone for the changes to take 
affect.
2.

All languages may not be available for selection. The available 

languages are dependant on the language packs currently loaded to the IP 
phone.

Draft 1