Aastra Telecom 9143i Series User Manual

41-001160-03, Rev 00, Releaes 2.4 

5-59

Configuring Operational Features

The IP phones (including the 6757i CT handset) have a park and pickup call 
feature that allows you to park a call and pickup a call when required. There are 
two ways a user or administrator can configure this feature:

•

Using a static configuration (globally configures park and pickup)

•

Using a programmable configuration

The IP phones support the Park/Pickup feature on the Asterisk, BroadWorks, 
Sylantro, and ININ PBX servers.

The following paragraph describes the park and pickup static configuration on the 
IP phones.

For information on configuring the park and pickup programmable configuration 
(using a key), see 

 on 

Park/Pickup Static Configuration (9480i, 9480i CT, 6755i, 6757i, 6757i 
CT only) 

Using the static method of configuring park and pickup configures these features 
on a global basis for all IP phones connected in the network. You can use the 
configuration files or the Aastra Web UI to configure a park/pickup static 
configuration.

In the configuration files, you use the following parameters to statically configure 
park/pickup:

The IP phones accept both methods of configuration. However, to 

avoid redundancy, Aastra Telecom recommends you configure either a 
static configuration or a programmable configuration.

Draft 1