Aastra Telecom 9143i Series User Manual
Operational Features
5-184
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Speeddial/Conference Key (not applicable to the 6751i)
The IP Phones allow you to configure a softkey/programmable key/expansion
module key to be used as a speeddial conference key (Speeddial/Conf key) while
remaining in the current call. This key allows a user on a call, to conference
another party at a pre-defined number while remaining in the conference.
module key to be used as a speeddial conference key (Speeddial/Conf key) while
remaining in the current call. This key allows a user on a call, to conference
another party at a pre-defined number while remaining in the conference.
For example, while on an active call, a user can use the Speeddial/Conf key to dial
a recording service and have the resulting conference recorded.
a recording service and have the resulting conference recorded.
How it Works
If you configure a softkey/programmable key/expansion module as a Speeddial/
Conf key, and you press this key while on an active call, the focused line changes
to the dialing line. A Cancel softkey displays on the phone (only those phones
that have LCDs larger then 3 lines), allowing you to abort the conference
speeddial if required. The message "Ringing..." displays below the number when
the far end is ringing. The message "Conf. Unavailable" briefly displays when a
conference is already in progress or when the CT handset is in use. The active call
is not put on hold when the speeddial number is dialed.
Conf key, and you press this key while on an active call, the focused line changes
to the dialing line. A Cancel softkey displays on the phone (only those phones
that have LCDs larger then 3 lines), allowing you to abort the conference
speeddial if required. The message "Ringing..." displays below the number when
the far end is ringing. The message "Conf. Unavailable" briefly displays when a
conference is already in progress or when the CT handset is in use. The active call
is not put on hold when the speeddial number is dialed.
Limitations for Speeddial/Conference Key
The following are limitations for the Speeddial/Conference key:
•
The CT handsets are not supported.
•
The feature is not compatible with centralized conferencing.
The softkey/programmable key is called "Speeddial/Conf" in the Web UI drop
down list. In the configuration file, use "speeddialconf" as the softkey type.
down list. In the configuration file, use "speeddialconf" as the softkey type.
Note:
If not currently in a conference, the Speeddial/Conf key is disabled
on the active call.
Draft 1