Siemens 1190 User Manual

You can configure the HiPath 1100 to send a warning 

tone in the event that no external line is available for 

LCR (see Programming Manual - Main Configurations - 

Warning Tone when LCR is not available). This will alert 

the user to the fact that the call is being completed by 

a standard Carrier and that rates may be higher than 

usual.

To warn the user that a different carrier is completing 

the call, the system telephone display will display "EX-

PENSIVE CONNECTION" and a warning tone will be 

heard.

With ACS (Alternative Carrier Selection) the system can 

be set to use a specific carrier regardless of user’s se-

lection. This feature allows you to choose the carrier 

that offers the best rates at the specified calling time or 

to select a default carrier for all calls, assuming conver-

sion rules are properly defined.

The first digits of the number dialed by the user are an-

alyzed by the system. If the system determines that 

they belong to Conversion rules, it replaces them with 

the rule’s preset numbers. The route/destination to be 

used can also be preset.  There is no field available to 

specify a carrier. The carrier code must be included in 

the conversion rule.

Different conversion rules can be applied to the same 

number, depending on the time of day and day of the 

week. It is possible to define a maximum of 100 conver-

sion rules.

Example: Number dialed: 262 XXXX

Conversion Rules:

[1] ACS does not affect Emergency Numbers when the user dials di-

rectly. 

A dialing rule may change if it is configured for using the Overflow 

option. 

Conversion rules must be configured using the HiPath 1100 Man-

ager.

 

 

01

267

342

0

801

oi.book  Seite 39  Mittwoch, 16. August 2006  8:41 08