Siemens 70isdn User Manual

kap01.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Profiset®70isdn complies with the European standard 

EN 60 950, which deals with the safety of information 

technology appliances including electronic office equip-

ment. This device has been designed with safety in mind, 

thus protecting both individuals and objects.

For your safety and protection, the telephone must not be 

used in bathrooms, etc. as it is not splashproof.

There is always the danger of small objects being swal-

lowed by young children. In the case of the Profiset 

70isdn, this applies in particular to the connecting cord 

clip. 

Please make sure that such items are not accessible to 

children.

●

The telephone should be operated in a controlled en-

vironment with an ambient temperature of between 

+5 °C and +40 °C. 

●

Under normal circumstances, the rubber feet of the 

telephone will not leave marks on the installation sur-

face. However, due to the vast array of surface finish-

es applied to furniture, marks on the installation sur-

face cannot be ruled out. Place the unit on a smooth, 

non-slip surface.

●

To ensure good handsfree talking quality, the area in 

front of the microphone (front right) should be kept 

clear. The optimum handsfree distance is 50 cm.

●

Do not install the telephone in a room where large 

quantities of dust accumulate; this can considerably 

reduce the service life of the telephone.

●

Do not expose the telephone to direct sunlight or any 

other source of heat, as this is liable to damage the 

electronic equipment and the plastic casing.

●

Do not operate the telephone in damp environments 

such as bathrooms.

●

The power supply connector of the NTBA must be 

inserted.