Siemens 20 User Manual

administration.fm

A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual

   

  

  

The Simple Network Management Protocol is used by network management systems for mon-
itoring network-attached devices for conditions that warrant administrative attention. An SNMP 
manager surveys and, if needed, configures several SNMP elements, e.g. VoIP phones.

The OpenStage phone supports SNMP version 1 and 2.

There are currently 4 categories of trap that can be sent by the phones:

OpenStage phones support the following types of standard SNMP traps, as defined in RFC 
1157:
•

coldStart: sent if the phone does a full restart.

•

warmStart: sent if only the phone software is restarted.

•

linkUp: sent when IP connectivity is restored.

These traps are designed specifically for receipt and interpretation by the QDC collection sys-
tem. The traps are common to SIP phones, HFA phones, Gateways, etc.

Currently, these traps are related to problems in registering with a SIP Server and to a failure 
in remotely logging off a mobile user.  These traps are aimed at a non-expert user (e.g. a stan-
dard Network Management System) to highlight important telephony related problems.

Currently, the following traps are defined: 

TraceEventFatal: sent if severe trace events occur; aimed at expert users.

TraceEventError: sent if severe trace events occur; aimed at expert users.

 

|

--- Administration

       

|

--- Network

             

|

--- Update Service (DLS)

                   |--- DLS address
                   |--- DLS port
                   |--- Contact gap
                   

|

--- Security status