Toshiba IP-5000 Series User Manual
IPedge
Feature Operations
Feature Operations
58
TOSHIBA
IPedge UG 06/11
Privacy
Privacy controls the ability of more than one person to use the same
extension at the same time. Privacy applies to multiple appearances of
extensions, Phantom extensions, outside Lines, and outside Line Group
buttons. The application of Privacy to individual telephones is controlled in
system programming.
extension at the same time. Privacy applies to multiple appearances of
extensions, Phantom extensions, outside Lines, and outside Line Group
buttons. The application of Privacy to individual telephones is controlled in
system programming.
By default, the system is private. If you are in a conversation, another
telephone with an appearance of the line on which you are talking cannot
intrude unless that telephone has been programmed for Privacy Override. In
that event, the other telephone may enter and leave the conversation at will. If
all users are provided with Privacy Release in Class of Service, the system
will function as non-private.
telephone with an appearance of the line on which you are talking cannot
intrude unless that telephone has been programmed for Privacy Override. In
that event, the other telephone may enter and leave the conversation at will. If
all users are provided with Privacy Release in Class of Service, the system
will function as non-private.
Your telephone may be equipped with a
Privacy Release and/or a
Privacy on Line button. On a normally private telephone, Privacy
Release allows other appearances of your line to join the conversation. On a
normally non-private telephone,
Privacy on Line allows you to exclude
others. The Privacy condition may be toggled at any time during a
conversation. At the end of the conversation, the line’s privacy condition
returns to its original state.
conversation. At the end of the conversation, the line’s privacy condition
returns to its original state.
Use Privacy Release
•
While on a CO line call, press
Privacy Release. The LED lights red.
The outside line flashes at all appearances. When another station user
enters the outside line call by pressing a common outside
enters the outside line call by pressing a common outside
Line, the
Privacy Release LED turns Off.
•
To add a third station, press
Privacy Release again; the process
repeats.
Set/Cancel Privacy
•
Press
Privacy on Line to set privacy. The LED lights steady red.
Others are blocked from entering your outside line calls when they press
a common
a common
Line.
•
Press
Privacy on Line again to cancel the feature. The LED turns Off.
Redial
Use this button to redial the last number dialed from your telephone.
•
To redial the last number, press
Redial
or
*
0
.
Speed Dial
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a
shorter code. Dial sequences can include telephone numbers, authorization
codes, passwords feature activation codes, and pauses. Speed Dial may be
used to originate a call or invoked after a call is established. There are two
types of Speed Dial:
shorter code. Dial sequences can include telephone numbers, authorization
codes, passwords feature activation codes, and pauses. Speed Dial may be
used to originate a call or invoked after a call is established. There are two
types of Speed Dial:
•
System
SD – All telephones in your system can share a list of up to 800
System Speed Dial numbers under the exclusive control of the System
Administrator. In some cases, System Speed Dial enables you to reach
numbers that you would not be allowed to dial directly from your
telephone.
Administrator. In some cases, System Speed Dial enables you to reach
numbers that you would not be allowed to dial directly from your
telephone.
•
Station
SD – Your System Administrator allocates a block of up to 100
personal SD numbers (10 per telephone). You have exclusive use of
them and you can create and change them from your own telephone. If
them and you can create and change them from your own telephone. If