Sony 500 User Manual
Step by step
More functions/services
80
Using system functions from outside
DISA (direct inward system access)
DISA (direct inward system access)
If configured (contact your service personnel), you can
use an external phone like an internal station to set up
an outgoing external connection via the system. You
can also activate or deactivate the following system
functions:
use an external phone like an internal station to set up
an outgoing external connection via the system. You
can also activate or deactivate the following system
functions:
•
Reset services and functions,
code #0
code #0
•
Call forwarding, code
*
1/#1
•
Lock and unlock phone,
code
code
*
66/#66
•
Save your PIN,
code
code
*
93
•
Send a message,
code
code
*
68/#68
•
Leave an advisory message,
code
code
*
69/#69
•
Ringing group, code
*
81/#81
•
Group call, code
*
85/#85
•
Caller ID suppression,
code
code
*
86/#86
•
Camp-on tone, code
*
87/#87
•
Open door, code
*
•
Release door opener, code
*
89/#89
•
Control relays, code
*
90/#90
•
Do not disturb, code
*
97/#97
•
Ringer cutoff, code
*
•
Dial using speed dial, code
*
•
Associated service, code
*
83
Prerequisite: Your phone supports tone dialing (DTMF)
or you can switch your phone to tone dialing. The phone
is not connected to the system.
or you can switch your phone to tone dialing. The phone
is not connected to the system.
j
Establish a connection to the system. Enter the station
number (contact your service personnel).
number (contact your service personnel).
j
Wait for the continuous tone (if necessary, switch pho-
ne to tone dialing) and enter the internal number assig-
ned to you and the corresponding PIN.
ne to tone dialing) and enter the internal number assig-
ned to you and the corresponding PIN.
(
Enter the code (only required if programmed in the sys-
tem).
tem).