Topcom Axiss 50 User Manual

 

AXISS 50

3

 

-

Plug one end of the phone line into the telephone line wall socket 
and the other end into the back of phone.

-

Plug one end of the telephone cable into the base of the unit and 
the other end into the receiver.

 

1.  Transfer button 

 

3. Pause 

 

2.  Redial button 

 

With the Transfer button R, also called flash or recall, you can transfer 
phone calls when you are using a telephone exchange (PABX).

 

When you want to call back the last dialled telephone number, press the 
Redial button as soon as you have picked up the receiver. The number will 
be redialled automatically.

 

When you receive a phone call, the unit will ring. The ring volume can be 
adjusted by means of the Ring Volume switch at the back of the phone (Hi-

, Lo-

)

 

The Axiss 50 has been set to tone dialling mode (DTMF). When you press 
a numerical button and you still hear the dialling tone, you have to switch 
to pulse dialling mode by means of the Tone/Pulse (T/P) switch.

 

This equipment comes with a 24-month warranty. The warranty will be 
honoured on presentation of the original or a copy bill or receipt, provided 
the date of purchase and the unit type are indicated.
During the time of the warranty Topcom will repair free of charge any 
defects caused by material or manufacturing faults. Topcom will at its own 
discretion fulfil its warranty obligations by either repairing or exchanging 
the faulty equipment.
Any warranty claims will be invalidated as a result of intervention by the 
buyer or unqualified third parties.
Damage caused by inexpert treatment or operation, and damage resulting 
from the use of non-original parts or accessories not recommended by 
Topcom is not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as 
lightning, water and fire, nor does it apply if the unit numbers on the 
equipment have been changed, removed or rendered illegible.

 

AXISS50.book  Page 3  Thursday, June 12, 2003  9:58 AM