Topcom Fidelity 1081 User Manual

Page of 8
Topcom Fidelity 1081
3
Topcom Fidelity 1081
ENGLIS
H
1
Before Initial use 
Thank you for purchasing this new desktop caller 
ID telephone.
1.1
Intended Purpose
This product is intend to be connected indoor to 
an analogue PSTN telephone line.
1.2
Caller ID
1.3
Connection
This device has been designed and manufactured 
to comply with the 98/482/EC rule, referent to the 
Pan European connection of a terminal to the 
Public Switching Telephone Network (PSTN) and 
following the established guidelines by the 1999/
5/EC Directive about radio electric equipment and 
the reciprocal acknowledge of their conformity. 
However, due to the fact that there are some dif-
ferences in the PSTNs from one country to anoth-
er, the verifying measurements by themselves do 
not set up an unconditional guarantee for an opti-
mal working in every connection point to the 
PSTN of any country.If any problem comes up, 
get in touch firstly with the distributor.
In any case, use conditions for which the product 
has been created should be respected as well as 
avoid its use in public or private networks with 
technical requirements clearly different to those 
established in the EU.
2
Safety instructions
Do not place the basic unit in a damp room or 
at a distance of less than 1.5 m away from a 
water source. Keep water away from the 
telephone.
Do not use the telephone in environments 
where there is a risk of explosions.
Dispose of the batteries and maintain the 
telephone in an environment-friendly manner.
3
Cleaning
Clean the telephone with a slightly damp cloth or 
with an anti-static cloth. Never use cleaning 
agents or abrasive solvents.
4
Disposal of the device 
(environment)
At the end of the product lifecycle, 
you should not throw this product 
into the normal household garbage 
but bring the product to a collection 
point for the recycling of electrical 
and electronic equipments. The 
symbol on the product, user guide and/or box in-
dicate this.
Some of the product materials can be re-used if 
you bring them to a recycling point. By re-using 
some parts or raw materials from used products 
you make an important contribution to the protec-
tion of the environment.
Please contact your local authorities in case you 
need more information on the collection points in 
your area.
To use ‘Caller ID’ (display caller), this 
service has to be activated on your 
phone line. Normally you need a separate 
subscription from your telephone 
company to activate this function. If you 
don’t have the Caller ID function on your 
phone line, the incoming telephone 
numbers will NOT be shown on the 
display of your telephone.
The CE symbol indicates that the unit 
complies with the essential 
requirements of the R&TTE directive.
Please read carefully through the 
following information concerning safety 
and proper use. Make yourself familiar 
with all the functions of the equipment. 
Be careful to keep these advice notes 
and if necessary pass them on to a third 
party.