Telular SX5T CDMA User Manual

Once you have installed and activated your SX5T, you’ll be ready to make and receive calls, set up
voicemail, and send and receive faxes. This section explains how to use the features of the SX5T for
all your communications.

Pick up the telephone handset. (The phone is now “off-hook.”)

Listen for a dial tone. (If you hear a No Service tone [fast beeping], hang up and try again. If the
No Service tone continues, contact your service provider to verify that cellular service is
available.)

Dial a phone number. (When you have finished dialing, the call will be sent automatically.)

• When the telephone rings, pick up the handset and begin talking.

• When you are finished with a call, hang up the phone by placing the handset back on the

telephone cradle or by pressing the 

Off or End button.

• During a call, press the 

Flash key on your handset (if your phone doesn’t have a Flash key,

press and release the switch-hook).

If you hang up your phone when a call is on hold, the call will be disconnected.

• Press the 

Flash key on your phone (or press and release the switch-hook).

• When you’re on an active call and a new incoming call arrives, you will hear a short tone on your

phone. To place the current call on hold and answer the incoming call, press the 

Flash key on

your phone (or press and release the switch-hook). (To switch between calls, simply repeat the
process.)

• If a call comes in while you are dialing or when you have the phone off the hook, you will hear a

call waiting tone on your phone. To answer the incoming call, press the 

Flash key on your

phone (or press and release the switch-hook).

Call Hold and Call Waiting are not available with all service providers. These services may not be
available if you are using your SX5T in a roaming area. To determine these services’ availability in your
area, contact your service provider.

Pressing the Flash key or pressing and releasing the switch-hook after dialing a number will send
the call immediately.