Telular SX5T CDMA User Manual
Phonecell
®
SX5T CDMA2000
13
User Manual
Audio Line Level
If using
and
does not provide satisfactory volume options for
you (see “Volume Level” on page 12), you may adjust your phone system’s audio line level.
To adjust your phone system’s audio line level:
• From Configuration Mode, press
<0, 1, or 2>
.
0 = Low
1 = Normal (default)
2 = High
Auto-Send Delay
The auto-send delay is the amount of time the SX5T waits to dial after you make an entry on the
phone keypad. The default setting is 3 seconds and the valid range is 2-20 seconds.
phone keypad. The default setting is 3 seconds and the valid range is 2-20 seconds.
To change the auto-send delay:
• From Configuration Mode, press
< 2 - 20>
, where you
enter a number between 2 and 20 seconds. (For example, if you want the auto send delay to be
five seconds, press
five seconds, press
.)
Frequently Dialed Numbers (Zero Delay Dialing)
If you dial a phone number twice and stay connected for at least 15 seconds, the SX5T will remember
that phone number in the future and automatically send it without the auto-send delay whenever you
subsequently dial the number. This feature is enabled by default.
that phone number in the future and automatically send it without the auto-send delay whenever you
subsequently dial the number. This feature is enabled by default.
To enable Zero Delay Dialing (default setting):
• From Configuration Mode, press
.
To disable Zero Delay Dialing:
• From Configuration Mode, press
.
Call Barring
To avoid inadvertent service charges, you may enable your device’s Call Barring feature to bar all
outgoing calls (except emergency calls).
outgoing calls (except emergency calls).
To enable Call Barring:
• From Configuration Mode, press
<lock
code>
.
To disable Call Barring (default setting):
• From Configuration Mode, press
<lock
code>
.
#
*
0
*
2
4
1
*
#
#
*
1
*
2
4
1
*
#
#
0
*
1
2
*
#
#
1
*
1
2
*
#
#
5
*
1
1
*
#
#
*
1
1
*
#
#
*
9
6
*
#
3
*
#
8
*
#