Telular SX5T CDMA User Manual

Page of 44
Phonecell
®
SX5T CDMA2000
17
User Manual
Using Additional Hardware Devices
Using an External Answering Machine
The SX5T can be used with an external answering machine in place of voicemail. If you plan to use
an external answering machine, be sure your service provider has not activated voicemail on your
account.
Setting Up Data Transfer for a Digital Video Recorder (DVR) or Satellite Receiver
The SX5T can be configured to dial out over your phone line so that a Digital Video Recorder (DVR)
or a satellite receiver can send and receive the data required for its operation. Your DVR or satellite
receiver must also be configured to tell the SX5T that it needs to send data. You must insert the prefix
before the phone number that the DVR or satellite receiver dials. Consult
your DVR or satellite receiver manual or provider if you need further assistance with this feature.
Using a Fax Machine With Your SX5T
Your SX5T supports sending and receiving faxes with a fax machine. You can connect your fax
machine to an existing wall phone (RJ11) jack or into either phone (RJ11) jack of the SX5T. In order to
send or receive a fax, the SX5T must be placed in fax mode, as it cannot automatically detect an
incoming fax. (This is standard procedure for faxing over wireless networks.) You must disable any
“turbo” fax modes or other non-standard transmission modes on your fax machine. Consult your fax
machine’s manual for more information.
The SX5T has two fax modes: 
1-time fax mode and Always fax mode
·
1-time fax mode will allow you to send or receive one fax, after which the 
SX5T will automatically return to voice mode. 
·
Always fax mode will keep the SX5T in fax mode until it is set back to 
voice mode.
To send a fax (1-time fax mode):
1.
Lift up the fax machine handset or press the 
Fax button.
2.
Press 
, then dial the fax number.
3.
Press 
Start on the fax machine.
To receive a fax (1-time fax mode):
1.
Set your fax machine to connect after the minimum number of rings allowed.
2.
Press .
3.
Notify the sender that you are prepared to receive the fax.
To set your device to “Always fax mode”:
• Press .
To make one voice call while in “Always fax mode”:
• Press .
To return your device to voice mode (default setting):
• Press .
#
7
*
#
#
4
*
#
#
5
*
#
#
1
*
#
#
1
*
#
Note:
Contact your service provider to confirm the availability of fax service on your wireless account.
Note:
Contact your service provider to confirm the availability of data transfer service on your wireless
account.
#
2
*
#