Spectralink 410 User Manual
SpectraLink Corporation
Link Wireless Telephones and Accessories User Guide
Backlight
(PTB450 only)
The backlight comes on when any key is pressed or when there is an
incoming call and stays on for ten seconds. It turns off after ten
seconds if another key is not pressed within that period.
incoming call and stays on for ten seconds. It turns off after ten
seconds if another key is not pressed within that period.
The Wireless Telephone Headset
SpectraLink offers optional headsets for use in noisy environments
or if you need to have your hands free while talking on the Wireless
Telephone.
To use the headset, simply plug it into the jack on the side of the
Wireless Telephone. The headset is specially designed to work
properly with The Link Wireless Telephone. We do not recommend
using other headsets.
or if you need to have your hands free while talking on the Wireless
Telephone.
To use the headset, simply plug it into the jack on the side of the
Wireless Telephone. The headset is specially designed to work
properly with The Link Wireless Telephone. We do not recommend
using other headsets.
Ringing with headset To hear ringing through a headset, the ring type must be set to
SOFT
.
Answer a call To answer a call when your headset is plugged in, press any key
except
PWR
or
END
.
Low headset volume The speaker volume level can be adjusted separately for headset use.
Plug the headset in and press
FCN
until
VOLUME
displays. Use the
keypad to enter a volume level from
1
(softest) to
8
(highest). This
sets the low volume. High volume is automatically set two levels
higher than low volume. Toggle between high and low volume by
higher than low volume. Toggle between high and low volume by
pressing the
VOL
key while in a call.
Part Number: 72-0035-51-I.doc
Page 8