Allied Telesis AT-MC101XL-20 990-000444-20 Data Sheet

Product codes
990-000444-20
Page of 2
Datasheet | 
Media Converters
AT-MC101XL
TX to FX Fast Ethernet media converter with
multi-mode ST fiber connectors
AT-MC102XL
TX to FX Fast Ethernet media converter with
multi-mode SC fiber connectors
AT-MC103XL
TX to FX Fast Ethernet media converter with
single-mode 15km SC fiber connectors
AT-MC103LH
TX to FX Fast Ethernet media converter with
single-mode 40km SC fiber connectors
Fiber Connections
The Allied Telesis range of Fast Ethernet media
converters provides a complete family of
conversion devices, allowing users to extend the
size of UTP networks with the use of fiber
cabling. Supporting both SC and ST fiber
connectors, these converters can be used to
extend networks with up to 2km of multi-mode
fiber or 40km of single-mode fiber.
Auto-Negotiation and MissingLink™
The MissingLink feature enables the fiber optic
ports on the media converter to pass the ‘Link’
status of their connections to each other. When
the media converter detects a problem with
one of the ports, such as the loss of connection
to an end-node, the media converter shuts
down the connection to the other port, thus
notifying the node that the connection has been
lost.
Simple Installation
All the media converters feature auto
MDI/MDI-X, allowing the converter to be
connected to either a PC, hub or switch with a
simple UTP cable. The media converters also
allow the installer to test the integrity of fiber
connection, by forcing the converters to
communicate over the fiber cable. This ‘Link Test’
feature allows installers to check for cable faults
without the need for expensive fiber optic test
equipment.
Standalone or Rack-mounted
Each small media converter is powered by an
external power supply unit for use in standalone
applications. Where multiple media converters
are being used, up to 12 standalone devices can
be inserted into a low-cost rack-mount chassis,
allowing all the converters to be powered by a
single internal power supply. In critical
applications, a second load sharing internal
power supply can be installed into the rack-
mount chassis.
Hassle Free Support
Allied Telesis Fast Ethernet media converters
offer free technical support, ensuring trouble-
free installation.
Key Features
EnergyStar power adapters save customers a
minimum of 20% power consumption*
Half and full-duplex operation
Transparent to IEEE 802.1Q packets
Rack-mountable using optional 
AT-MCR12, AT-TRAY4 or AT-TRAY1 chassis
Wall-mountable using AT-WLMT
Auto MDI/MDI-X
MissingLink
Link test
RoHS Compliant
MC10x series
Fast Ethernet Media Converters
Allied Telesis
www.alliedtelesis.com
* Compared to previous models