Lucent Technologies 108488222 User Manual

CALLMASTER® V Telephone Console User’s Guide 555-233-735

Issue 1

Call-Handling Features

RELEASE

An ACD agent can press

to disconnect from a call.

To disconnect from a call

1. Press .

Note: Pressing

is faster than waiting for a caller or trunk to

disconnect and enables you to perform other ACD or voice
terminal procedures sooner. You

do not hear dial tone after you

press .
If you want to disconnect from a call and then place another
call, you can press

instead.

SPEAKER (LISTEN-ONLY) and GROUP LISTEN

The Speaker feature allows you to place calls or access other features without
using the headset. However, in order to speak to the other party, you must use
the headset. With the Group Listen feature, the headset and speaker are
active at the same time.

To use the listen-only speaker to place a call without using the headset
or for any listening-only feature (such as monitoring a call on which
you have been put on hold or for group listening)

1. Press

(or

)

2. Place a call or access the selected feature.

3. Adjust speaker volume if necessary:

To raise the volume, press the right half of the Speaker Volume control
button labeled

; to lower the volume, press the left half of the

Speaker Volume control button labeled

The display shows the volume level: (There are eight volume levels.)

To end a call (while the headset is off and only the speaker is active)

1. Press

(or

)

To activate the speaker while using the headset so that both are active at
the same time (the Group Listen feature)

1. While you are using the headset, activate the speaker by pressing

(or

)

To turn off the speaker and return to headset use

1. Press

(or

)

Release

Drop

Spkr

->>>>>> +

Spkr