Adtran 604 User Manual

Total Access 600 Series System Manual

Section 4  User Interface Guide

61200624L1-1B

© 2004 ADTRAN, Inc.

113

This is a read-only field that displays the live DLCI state. 

This is a read-only field that displays the live protocol status. Menu visible for physical and logical 

 

ports only.

View the voice port activity and coding type.

Clears all recorded statistics for the interface and returns all counters to 0.

Configure the 

 parameters and view the status of the V.35 interface using items from this 

menu. The V.35 interface is only available when the configured network protocol is ATM. Refer to L2 
Protocol (ATM Firmware) – NET> ATM on page 101.

Configure the 

 mode. Choices are 

(def) and 

. Selecting 

 configures the 

interface for network interworking and should be used for Frame Relay over ATM applications. Selecting 

 configures the interface for service interworking allowing the Total Access 600 Series to make the 

translation between Frame Relay signaling on the V35 interface and ATM protocols on the network 
interface. 

Configures the 

 parameters for either FRF5 or FRF8 signaling.

Specifies the maintenance protocol or signaling protocol between the local V.35 port and the attached DTE 
port. The choices are 

 (def), 

, 

, and 

.

T392 for signaling protocol. This parameter has no meaning if the 

 is set to 

 

(no signaling). The default setting is 

.

Displays the L2 statistics for FRF5 or FRF8 operation.