Adtran 612 User Manual

Section 4  User Interface Guide

Total Access 600 Series System Manual

 78

© 2004 ADTRAN, Inc.

61200624L1-1B

View the integrated DSX interface status and configure T1 parameters from this menu.

Configure the various DSX parameters and enable/disable loopbacks from this menu.

This sets the frame format for the DSX interface. The setting must match the frame format of the circuit to 
which the interface is connected. Choices are 

, 

(D4). Extended Superframe (

) provides a 

non-disruptive means of full-time monitoring on the facility datalink (FDL). Default is 

.

This sets the line code for the DSX interface. The setting must match the line code of the circuit to which 
the interface is connected. Choices are 

 (bipolar with 8-zero substitution) and 

 (alternate mark 

inversion). Default is 

.

Select the line build out for the DSX1 interface. The choices are 

or

. Default is 

. The 

 

 setting is provided for terminal equipment that has trouble recovering 

a full 0dB level signal (typically one with a DS1 long haul line interface).

Configures the Total Access 6XX to respond (

) or not respond (

) to a received ANSI 

Inband CSU loopback pattern. 

 configures the Total Access 6XX to disregard ALL loopback 

commands sent inband or over the FDL. Default is 

.

Configures the sensitivity of the T1 receiver for this interface to provide increased sensitivity for long-run 
T1 applications. Choices are 

, 

 

, and 

 

. 

Displays the T1 status including performance data and alarm histories.

Displays the T1 performance data.

Provides current (15-minute window) status on key performance measures as specified in ANSI T1.403 
and AT&T TR 54016 as well as historical statistical totals for the integrated DSX port.