Lg Electronics aria130 User Manual

ʅ

ʅ

ʅ

ʅ

19

Button

Procedures

To register wake-up time,

 Press TRANS/PGM button. 

 Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.(HH = 00~23, MM = 00~59)

 Press HOLD/SAVE button for “one-day” or dial # and HOLD/SAVE button for “until 
canceled”. (Confirmation tone is heard.) 

Range

The system automatically sends ring signal to a station which registers a wake-up time. There are two kinds of wake-up call, 
one is effective for one-day, the other is effective until canceled.

To cancel wake-up call, 

 Press TRANS/PGM button and dial 4 2. 

 Press HOLD/SAVE button. (Confirmation tone is heard.)

Procedures

Range

Each station and speed dial number can be assigned to a name. When names are programmed, you may select a speed dial 
number by the stored name.

Button

 Press SPEED button twice. 

 On the display, you will see the following.

DIAL BY NAME

ICM : 1 U_SPD : 2 S_SPD : 3  

 Select desired type.

1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial) 

 Confirmation tone is heard and you will see the following.

1 : XXXX  XXXX  XXXXXX
2 : YYYY  YYYY  YYYYYY

Procedures

Range

Button

 Pressing VOLUME button, the cursor will be moved to the next name. When the cursor 
points a name or a dial number to call, press HOLD/SAVE button. Then, the stored 
number is dialed.

 You may enter characters using the code in “Storing Dial by Name”.  The LCD will display 
the first two names which match your input. (You may delete the last letter of your input by 
pressing CALLBK button. And then, the previous matched   name is displayed.)

 You can see the matched phone number by pressing FLASH  button while the name is 
displayed (toggle).

Button

Procedures

Range

You can program your name and people using display phones will see your name instead of your station number.

 Press TRANS/PGM button.

 Dial  7 4. 

 Enter your name. (up to 7 letters using the code in “Storing Dial by name.) 

 Press HOLD/SAVE button.