Lg Electronics aria130 User Manual

ʅ

ʅ

ʅ

ʅ

22

Button

Procedures

Range

When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is displayed on the LCD of 
the station. If the DISA/DID external party hangs up the call before being answered, the CLI will be stored in the CO 
message wait queue in the called party.

To retrieve CLI Message,

 Press CALLBK button.

 The stored message will be shown on the LCD.

To delete the current CLI message and see the next one,

 Press CONF button.

To make a callback,

 Press HOLD/SAVE button.

 The stored number is dialed as speed dialing.

To see the next/previous CLI message,

 Press VOLUME button.

To delete all CLI messages, 

 Press SPEED button twice.

 If DVU message is stored with CLI message, the CLI message will not be deleted by 
pressing SPEED button.

 Dial the CO access code after hearing dial tone or voice guide from DVU.

 Or, dial the CO access code after dialing the programmed authorization code (when 
needed) for outgoing call.

Button

Procedures

Outside caller can access a CO line which is programmed as DISA line. 

Range

Button

Procedures

Range

 Press TRANS/PGM button and dial  7 1

 The language in LCD is changed into default value.

 If pressing TRANS/PGM + 7 1, the language in the LCD is changed to the nation’s 
language.

Button

Procedures

Range

To terminate alarm signal while idle state,

 Dial ✳ 5 6 5

 Confirmation tone is heard and the alarm signal is terminated

at all assigned stations.

To record the conversation,

 Press the programmed {RECORD} button.( To program the {RECORD} button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] +5 4 + [HOLD/SAVE] )

To finish the recording,

 Press the programmed {RECORD} button again.  Or, replace the handset.

Button

Procedures

While a CO line call, you can record the conversation and it will be saved in its own mailbox. 

Range