Linear AE-100 User Manual

13

System Utility Commands (Continued)

Timed Access Relay Latch

For servicing or testing, while in Programming Mode, the access relay 
can be latched manually from the keypad for a period of hours.

1. Press       

2.  Enter the amount of time in hours (01-98) for the access relay to latch.

3. Press 

Latch Access Relay

For servicing or testing, while in Programming Mode, the access relay 
can be latched manually from the keypad for an indefi nite period of time.

✦  NOTE: This command will reset and override and timed access relay latch 

1. Press       

Release Access Relay

For servicing or testing, while in Programming Mode, this command 
will release the access relay if it has been manually latched (timed or 
indefi nite).

1. Press       

Delete All Directory Entries

This utility command will permanently erase all Directory Codes, Names, 
Telephone Numbers, and resident’s Entry Codes.

  CAUTION: This utility command will erase ALL the Directory Entries in the 

✦  NOTE: This step cannot be performed remotely through the telephone.
1. Press     
2. Press       again for verifi cation.

Delete All Stand-alone Entry Codes

This utility command will permanently erase all Stand-alone Entry 
Codes.

  CAUTION: This utility command will erase ALL the Stand-alone Entry 

✦  NOTE: This step cannot be performed remotely through the telephone.
1. Press     
2. Press       again for verifi cation.

92#92#

83#

80#HOURS#

HOURS = RELAY LATCH TIME IN HOURS (01-98) 

81#

93#93#