Lead Data BVP 8882 SIP User Manual

"Source" key (Orange):
The user can change the video source during the call or enter a
standby state by pressing this key.
In offline state, this off/on external video source function is applicable
for one call only (by default, the external video source is off: it is the
local video which is sent to the distant party). The user can activate
the external video source before launching a call. In that case, when
the call party is going to activate the video source, the caller will not
send his local video but rather the external video source instead. To
switch from this external video source to the local one, he just needs
to press the Source key again.
At the end of this call, the external video source function is no longer
activated by default.

LEDs

"Video" :

The "Video" LED is in yellow:
- If the user is on line and the video mode is off, the LED is off
- When the user switches in Video mode, the LED lights up
permanently
- As soon as "Video privacy" is on, the yellow LED goes out and
warn the user that his image is no more displayed
- As soon as user freezes his local image, the LED
flickers/blinks
- As soon as user picks up a call, the LED blinks

"En Service":
The "En Service" LED is in green:
- When VideoPhone BVP 8882 SIP is well-connected, the LED
is in permanent green color

- As soon as "Sound privacy" (mute) is on, the LED flickers
quickly
- When VideoPhone BVP 8882 SIP is off or the ethernet cable is
not connected, the LED switches off
- When VideoPhone BVP 8882 SIP is not connected to the
network (ie. the Ethernet cable is well- connected but the service
is not yet ready), the "En Service" LED blinks (until the user
receives his IP address and registers to Gatekeeper)