Lead Data BVP 8882 SIP User Manual

The VideoPhone BVP 8882 SIP package includes:                                                     

-  VideoPhone BVP 8882 SIP user manual.                                                   
-  

é

An integrated 5 inch LCD display which can be folded and     

   rotated.          

         

-  An integrated CCD camera for capturing images.                               
-  An integrated microphone for sound capturing and 

   

   intelligence are also required to allow for Videophony service.                                                                        
-  3 LEDs on the keypad: one yellow "Vid o" LED which is                       
   active(on) when video is transmitted by the terminal                       
   (i.e. when the camera is active) or which flickers when the 
    videophone is ringing. One green "En Service" LED which is 
    active(on) permanently when the terminal is connected              
    (i.e. has received an IP address) and ready for service or flicking. 
    One red "Message" LED which flickers when a new vocal/video 
    message is received.                                                                            
-  A small LED screen (with Leadtek logo around it) on the surface 
   of the LCD cover: when the LCD panel is closed, this will

 

   indicate the status of new messages or incoming calls.                        
   For incoming calls, the LED frequency interval should be: 125ms 
   on;125ms off; 125ms on, 125ms off. For message indicators (new 
   message is based on H.450.7 protocol), the LED blinks at an 
   interval of 125ms on,125ms off, 125ms on, and 750ms off, and so 
   on.                                                   

                                        

-  A wired handset.                                                                               
-  A power cord / power adaptor with a secure lock mechanical      
   design to connect the VideoPhone BVP 8882 SIP tightly.                              
-  An ethernet cable is used to connect VideoPhone BVP 8882 SIP to 
   an ADSL modem either directly or through a PLT (optional).                            
-  Two USB (1.1) interfaces which provide wireless network       
   connection solution via Leadtek USB WiFi Ethernet dongle   
   (optional).                                                                                             
-  An A/V Convertible Cable which provides one pair of 
   Audio/Video input (with green ring near the connector) of RCA 
   female connectors and one pair  of  Audio/Video output (with red 
   ring near the connector) of RCA female connectors.