Konftel 100/D User Manual

1

Check that the microphone is switched on. The red LEDs should

be lit (see page 1).

2

Tune the Konftel 100/D manually (see page 9).

3

Reduce the microphone volume if the party called complains

about too much echo (see page 5).

4

Check that the switch on the switch box is in the correct position

(see page 4).

5

Check that all wiring is correctly connected (see page 3).

6

Remove extension cords, if any, and see if the system works.

If not, contact your dealer.

Check that the microphone is switched on. The red LEDs should

be lit (see page 1).

Tune the Konftel 100/D manually (see page 9).

Reduce the microphone volume if the party called complains

about too much echo (see page 7).

Ensure that the PC sound card and program support full duplex.

Ensure that the party called has a conference unit, PC sound card

and program that support full duplex.

Ensure that the party called has sufficient capacity (bandwidth) for

the connection.

Check that all wiring is correctly connected (see page 6).

Remove extension cords, if any, and see if the system works.

If not, contact your dealer.

Clean the equipment with a 

dry, soft cleaning cloth. Use no liquids!