Konftel 100/D User Manual

Different makes of system telephones function in

different ways. That is why the volume on the

Konftel 100/D must always be accurately adjusted

the first time it is connected. This will ensure the

best function in conjunction with the system

telephone being used.

Lift the handset and place a call.

Switch to loudspeaker operation.

Loudspeaker volume is set by pressing the  – and +

keys.

Note that a volume control on the digital system

telephone will affect the loudspeaker volume on the

Konftel 100/D.

Press and hold down the Mute key for approxim-

ately 3 seconds until the red LEDs begin to blink

and a repeating tone is heard.

Press  –  and  +  to adjust microphone volume, then

speak so that the party on the other end can tell you

whether the volume should be adjusted up or down.

Speak in a normal conversational tone and change

the volume one step at a time.

Press the Mute key when you have completed setting

the volume.

Volume settings are retained even when

power is off.

 and  

 and 

and