Aastra Telecom 480I CT User Manual
50
/ IP Phone User Guide
Mak
ing Calls
from 48
0i CT Cordl
ess
Ha
ndset
Making Calls from 480i CT Cordless Handset
Pre-dialling a Number
Press the
v key to obtain dial tone and use the Keypad to dial the
number. You can also make a call by pre-dialling a number. Pre-dialling
lets you view a number before you dial. If the number is correct, press the
lets you view a number before you dial. If the number is correct, press the
v key to dial the number. If the number is incorrect, use the  key or
press down on the volume key to erase digits from right to left. Calls can
also be made directly from the Directory.
also be made directly from the Directory.
Using a Headset
The 480i CT cordless handset accepts headsets through the 2.5 mm audio
jack on the bottom of the phone. Contact your telephone equipment retailer
or distributor to purchase a compatible headset. Customers should read and
observe all safety recommendations contained in headset operating guides
when using any headset.
jack on the bottom of the phone. Contact your telephone equipment retailer
or distributor to purchase a compatible headset. Customers should read and
observe all safety recommendations contained in headset operating guides
when using any headset.
Receiving Calls
When a call is ringing at your extension, you will see the Inbound Call
screen. Press the
screen. Press the
v key to answer an incoming call or lift the handset out
of the charging cradle.
Call Privacy
In the 480i CT multi-handset system, it is possible to connect several
cordless handsets together with each other or with the base as extensions
to a call. This is just like an analog system with extension phones going off
hook to join a call in progress. However, because this system is actually
intended for use in an enterprise environment, some method of call
privacy is required.
All calls, base or handset, will begin in the "private" mode. In this mode,
no extensions will be allowed to join that handset or base call. There will be
a user interface provided to toggle between the "private" and "public"
modes.
cordless handsets together with each other or with the base as extensions
to a call. This is just like an analog system with extension phones going off
hook to join a call in progress. However, because this system is actually
intended for use in an enterprise environment, some method of call
privacy is required.
All calls, base or handset, will begin in the "private" mode. In this mode,
no extensions will be allowed to join that handset or base call. There will be
a user interface provided to toggle between the "private" and "public"
modes.
"Public" Feature Key
A feature key will be available in the feature list for the user to press to
toggle between the "private" and "public" modes for a call. Pressing the
Public
toggle between the "private" and "public" modes for a call. Pressing the
Public
feature key in the feature list anytime during a call will put the call
into the public call mode. When the call is in public call mode, the triangle
indicator will light in front of the Public label in the feature list. This will
also cause that feature key to appear on an available soft key but with a
different label – Private. The user can then press the Private soft key to
toggle the call back to private or he can navigate into the feature list and
press the Public feature key.
indicator will light in front of the Public label in the feature list. This will
also cause that feature key to appear on an available soft key but with a
different label – Private. The user can then press the Private soft key to
toggle the call back to private or he can navigate into the feature list and
press the Public feature key.