Radio Shack 1250 User Manual
13
USING HOLD
To put a caller on hold, press
HOLD
. The
HOLD
indicator lights.
To resume the call, press
HOLD
again or
pick up an extension phone on the same
line.
line.
Notes:
• Caller ID information does not ap-
pear for an incoming call while a call
is on hold.
is on hold.
• We do not recommend keeping a
call on hold for very long if you sub-
scribe to Caller ID. The Caller ID
information sent by the phone com-
pany might disconnect the call on
hold if a new call comes in.
scribe to Caller ID. The Caller ID
information sent by the phone com-
pany might disconnect the call on
hold if a new call comes in.
USING TONE SERVICES
ON A PULSE LINE
ON A PULSE LINE
If you have pulse service, you can still
use special services that require tone
signals, such as bank-by-phone, by fol-
lowing these steps.
use special services that require tone
signals, such as bank-by-phone, by fol-
lowing these steps.
1. Be sure
T/P
is set to
P
.
2. Dial the service’s main number.
3. When the service answers, press .
appears. Any additional numbers
you dial are sent as tone signals.
After you complete the call and hang up,
the phone resets to pulse dialing.
the phone resets to pulse dialing.
HOLD
Indicator
Indicator
43-986.fm Page 13 Monday, August 16, 1999 5:16 PM