Radio Shack 1250 User Manual
6
PREPARATION
INSTALLING A BACKUP
BATTERY
BATTERY
You can install an optional 9V backup
battery so if the AC power fails or you
unplug the phone (
battery so if the AC power fails or you
unplug the phone (
appears), the Sys-
tem 1250 will save the memory numbers
and Caller ID records. We recommend
you use an alkaline battery, such as Ra-
dioShack Cat. No. 23-553.
and Caller ID records. We recommend
you use an alkaline battery, such as Ra-
dioShack Cat. No. 23-553.
Caution: Use only a fresh battery of the
required size and recommended type.
required size and recommended type.
Follow these steps to install a battery.
1. Use a Phillips screwdriver to remove
the battery compartment cover’s
screw on the bottom of the system,
then remove the cover.
screw on the bottom of the system,
then remove the cover.
2. Place a fresh battery into the com-
partment as indicated by the polarity
symbols (+ and –) marked inside.
symbols (+ and –) marked inside.
3. Replace the cover and secure it with
the screw.
The System 1250 automatically tests
the battery each time it receives a call. If
the battery each time it receives a call. If
appears or the display dims, re-
place the battery.
Important: You must install the fresh
battery within 2 minutes after removing
the old battery. Otherwise, you might
lose the information stored in the
phone’s memory.
battery within 2 minutes after removing
the old battery. Otherwise, you might
lose the information stored in the
phone’s memory.
Cautions:
• Always remove old or weak batter-
ies. Batteries can leak chemicals
that can destroy electronic parts.
that can destroy electronic parts.
• Dispose of old batteries promptly
and properly. Do not burn or bury
them.
them.
43-986.fm Page 6 Monday, August 16, 1999 5:16 PM