Panasonic KX-UT670 User Manual
Network Camera
On the Home screen, tap
to start Network Camera
Viewer.
For up-to-date information about network cameras
that have been tested with this unit, refer to the
following web site:
http://www.panasonic.com/sip (for users in the United
States)
http://panasonic.net/pcc/support/sipphone (for users
in Canada)
that have been tested with this unit, refer to the
following web site:
http://www.panasonic.com/sip (for users in the United
States)
http://panasonic.net/pcc/support/sipphone (for users
in Canada)
Note
•
Depending on the camera model, some
operations may not be available.
operations may not be available.
Registering a Network
Camera
Camera
You can register up to 16 network cameras connected
to the network.
to the network.
1.
On the Home screen, tap
.
2.
In Network Camera Viewer, press
.
3.
Tap [Camera Registration].
4.
In the [Camera Registration] list, tap the number
of the entry you want to register the camera in.
of the entry you want to register the camera in.
5.
Enter the necessary information.
Camera Name:
Camera Name:
Specify the camera’s name. You can enter up
to 20 characters.
to 20 characters.
Camera Address
Enter the camera’s IP address or FQDN (Fully
Qualified Domain Name).
Qualified Domain Name).
Port No.
Enter the network camera’s port number (1 to
65535).
The factory default value is 80.
65535).
The factory default value is 80.
User ID:
Enter the user name to use when connecting to
the network camera (max. 32 alpha-numeric
characters).
the network camera (max. 32 alpha-numeric
characters).
Password:
Enter the password to use when connecting to
the network camera (max. 32 alpha-numeric
characters).
the network camera (max. 32 alpha-numeric
characters).
Paging No.:
Enter the phone number associated with the
camera (max. 32 characters).
camera (max. 32 characters).
Position of image:
Specify the crop area for the image displayed in
Network Camera Viewer. This unit supports
VGA and 720p. If the network camera's video
feed is currently being received,
indicates the current resolution (VGA or 720p).
Network Camera Viewer. This unit supports
VGA and 720p. If the network camera's video
feed is currently being received,
indicates the current resolution (VGA or 720p).
*1
Required item.
6.
When you have finished entering the necessary
items, tap [OK].
items, tap [OK].
Note
•
If a network camera is registered to a contact,
you can view the video feed from the network
camera while you are on a call with that contact
(Page 55).
you can view the video feed from the network
camera while you are on a call with that contact
(Page 55).
•
In the [Camera Registration] list, a check mark
is displayed on numbers to which a camera is
already registered. The camera’s name is also
displayed, if one was specified.
is displayed on numbers to which a camera is
already registered. The camera’s name is also
displayed, if one was specified.
•
Tapping [Cancel] returns you to the [Camera
Registration] list.
Registration] list.
•
For details about entering text, see page 23.
60
Operating Instructions
Document Version 2011-09
Network Camera