Mitel 5606 Leaflet
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2008, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
QUICK REFERENCE GUIDE
Turning the Handset On/Off
To turn on:
1. Press and hold the ON button. “Switch
on?” is displayed.
2. Press Yes within 10 seconds.
1. Press and hold the ON button. “Switch
on?” is displayed.
2. Press Yes within 10 seconds.
To turn off:
1. Press and hold the OFF button.
2. Select Yes and press OK.
1. Press and hold the OFF button.
2. Select Yes and press OK.
Making a Call
• Dial the number and then press the ON
button. The name of the called party is
displayed if available.
displayed if available.
OR
• Press the Navigation Key down arrow to
• Press the Navigation Key down arrow to
open the call list and use the Navigation
key to scroll the list of your last twenty
calls. Press the ON button to dial.
key to scroll the list of your last twenty
calls. Press the ON button to dial.
OR
1. In the Contacts menu, select Central
1. In the Contacts menu, select Central
Phonebook and the press the Right
navigation key.
navigation key.
2. Select the name to call from the list and
then press the ON button.
OR
• Press a pre-programmed hot key. For
• Press a pre-programmed hot key. For
information about programming Hot
keys, see the Mitel 5606 Wireless
Handset User Guide.
keys, see the Mitel 5606 Wireless
Handset User Guide.
Answering a Call
• Press the ON button or the Accept
softkey to answer a call in normal mode.
OR
• Press the Volume Up button or the
• Press the Volume Up button or the
middle softkey to answer in speaker
mode.
mode.
Ending a Call
• Press the OFF button to end a call.
Placing a call on Hold
• Press the R softkey to place a call on
Hold. After 30 seconds, “Hung Up” is
displayed and a busy tone sounds.
displayed and a busy tone sounds.
• Press the R softkey again to retrieve the
call.
Transferring a Call
1. Press the R softkey to put the call on hold.
2. Dial the number to which you want to
2. Dial the number to which you want to
transfer the call.
3. Press the On button to transfer the call.
3. Press the On button to transfer the call.
Note: Supervised transfer feature is system-
dependent.
Adjusting Volume Levels
To adjust earpiece volume
• Press Volume Up/Down button to
increase/decrease volume during a call.
To change ringer volume:
• In the Settings menu, highlight Alert
Signals.
• Select Ring Signals and press >.
• Select a call type and a volume level.
• Press Select to activate your choice.
• Select a call type and a volume level.
• Press Select to activate your choice.
To turn Loudspeaker on/off:
• Press the middle softkey before or during
a call.
To turn Mute on/off during a call:
• Press the Mute button. “Muted” is
displayed.
To turn ring signal on/off in standby
mode:
mode:
• Long press the Mute button to toggle ring
signal on/off. The “Audio Signals Off”
icon appears.
icon appears.
1 Loudspeaker
2 Display
3 Mute Button
4 Soft Keys
5 OFF Button
6 Alphanumeric Keys
7 Microphone
8 Navigation Key
9 ON Button
10 Menu Soft key
11 Volume Up/Down Button
12 LED
13 Alarm Button (optional)
2 Display
3 Mute Button
4 Soft Keys
5 OFF Button
6 Alphanumeric Keys
7 Microphone
8 Navigation Key
9 ON Button
10 Menu Soft key
11 Volume Up/Down Button
12 LED
13 Alarm Button (optional)
Off hook (call in progress)
Audio
signals
off
Battery
Loudspeaker
on/off
Headset
connected
New
message
Text
input
mode (capitals)
Text input mode (lower case)
Digit
input
mode
Phonebook
Locked
keypad
Unanswered
call
Incoming/Outgoing
call
Unread/Read
message
No movement/Man-down
alarm
Display Icons
MITEL
5606 Wireless Handset