Panasonic KX-TG9381T User Manual

35

For assistance, please visit http://www.panasonic.com/help

L

In step 2;
– c and d indicate which line the caller 

information was received from.

– If the item has already been viewed or 

answered, “Q” is displayed, even if it was 
viewed or answered using another unit.

– if an arrow (>) is displayed after the number, 

the whole phone number is not shown. 
Proceed with the operation for your unit.

Press {>} to see the remaining numbers. To 
return to the previous display, press {<}.

Base unit:
Press {8} to see the remaining numbers. To 
return to the previous display, press {7}.

L

In step 3, the unit automatically uses the line you 
set in line selection mode (page 17) to call back. 
When the line selection mode is set to “Auto”, 
the indicated line (c or d) is used for the call. 
If the indicated line is already being used or you 
want to select the other line:

Handset: Press {CALL}, then press {LINE 1} 
or {LINE 2}.

Base unit: Press {LINE 1} or {LINE 2}.

You can edit a phone number in the caller list by 
removing its area code and/or the long distance 
code “1”.

Proceed with the operation for your unit.
Handset: {MENU} i {V}/{^}: “View 
Caller ID

” i {SELECT}

Base unit: {CID}

{V}

/{^}: Select the desired entry.

Proceed with the operation for your unit.
Handset: {CALL}
Base unit: {EDIT}

Press {EDIT} repeatedly until the phone 
number is shown in the desired format.

Proceed with the operation for your unit.
Handset: {C}
Base unit: {SP-PHONE}

L

If the indicated line is already being used or 
you want to select the other line:

Handset: Press {LINE 1} or {LINE 2}.

Base unit: Press {LINE 1} or {LINE 2}.

Once you call back an edited number, the unit 
remembers the Area Code and Format of the 
Edited Number. Next time when someone calls 
from the same Area Code, caller information is 
customized by the unit as follows:

– When the call is being received, the Caller ID 

number is displayed in the same Format as the 
Edited Number.

– After the call is ended, the phone number of the 

caller, when reviewed from the Caller list, is 
displayed in the same Format as the Edited 
Number.

For example, you can use this feature to set the 
unit to ignore the area code of callers in your area, 
so that you can call these local numbers using 
caller information without dialing the area code.
To activate this feature, you must edit an entry in 
the caller list, then call that number. After that, 
phone numbers from that caller’s area code are 
edited automatically.

L

Phone numbers from the 4 most recently edited 
area codes are automatically edited.

L

If you move to another area, you can turn this 
feature off to erase previously edited area 
codes. To use this feature again, turn it on and 
reprogram the area codes you want to edit once 
again.

{

MENU} i {#}{2}{1}{4}

Y Handset / [ Base unit

1 Local phone number

2 Area code – Local phone number

3 1 – Area code – Local phone number

Y Handset / [ Base unit

TG938x(e).book  Page 35  Friday, July 3, 2009  10:10 AM