Panasonic KX-TVS80 User Manual
7.2
UTILITY COMMANDS
SYSTEM MAINTENANCE AND TROUBLESHOOTING
141
3.
Press RETURN.
4.
Perform a Standard File Transfer. Set the data terminal to the receiving (Answer) mode
(Xmodem) and specify the backup filename. The specified data will be transmitted to the
data terminal.
(Xmodem) and specify the backup filename. The specified data will be transmitted to the
data terminal.
Note
The data terminal used must be equipped with communications software that supports the
Xmodem file transfer protocol. The command can be canceled by Typing [\] before entering
the receiving mode. Once the receiving mode has been selected, use the cancel command of
the communication software being used.
Xmodem file transfer protocol. The command can be canceled by Typing [\] before entering
the receiving mode. Once the receiving mode has been selected, use the cancel command of
the communication software being used.
7.2.8
Loading New or Saved Data to the VPS (LOAD)
This command is used to install new data or to restore saved data to the VPS. The LOAD
command must be executed for each data file.
command must be executed for each data file.
When performing this operation, always wait until the process completion indication appears
before proceeding.
before proceeding.
1.
Type LOAD, then Press RETURN.
KX-TVS50
KX-TVS80
To start press ‘RETURN’
- - - - - - SAVE Start!!
$ LOAD
VPS Flash Memory Data Load (PC -> VPS : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menu
7. Personal Greetings
Select No.:=
VPS Flash Memory Data Load (PC -> VPS : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menu
7. Personal Greetings
Select No.:=