Panasonic KX-TVS80 User Manual

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS

51

Check the software version of the KX-T123211D by using System Program [98], which 
shows the software version number:Y201Z940430(TM3)

The underlined digits represent the software production date code (format YYMMDD). In 
this example, the date code is April 30, 1994 (year, month, day). For this software version, 
the software production date of the PBX must be April 30, 1994, or later.

Enable System Program [80] for each extension connected to the VPS.
This parameter is used to tell the KX-T123211D which extensions are connected to the 
VPS. Ports with this parameter enabled can receive Follow-on ID and DTMF call status 
signaling (busy, answered, disconnect, etc.) if the Voice Mail integration and DTMF 
integration features are also enabled.

Enable System Program [81] to turn on DTMF Integration. On extensions with the Voice 
Mail port parameter enabled, the KX-T123211D can send codes (DTMF tones) to indicate 
call states; this increases VPS efficiency. Codes apply to all transferred calls; CO line calls 
only indicate disconnect (provided the KX-T123211D is programmed for CPC detection 
and the CO sends the CPC signal). Refer to the Table 11 in the Section 3.2.4

Interface Parameters. 

Put all extensions connected to the VPS into 1 extension group using System Program [60].

Release Sequence 
for Call Waiting

*

N/A

F

N/A

N/A

F

F

F

*

Check with manufacturer.

N/A

Not Available

(A)

Adding "A" for "answer" to the operator and extension transfer eliminates the message: 
"You have a call" when the AA transfers a call. The VPS disconnects after line is 
answered. Adding "D" for "disconnect" creates a blind transfer.