Panasonic KX-TG9361 User Guide

29

Note:
L

To stop the alarm, press any dial key 
or place the handset on the base unit 
or charger.

L

When the handset is in use, the alarm 
will not sound until the handset is in 
standby mode.

L

If the talking alarm clock is set at the 
same time for two or more handsets, 
the first handset makes the 
announcement, while the other 
handsets only sound the tone.

L

If the other unit is in use at the set 
time, the handsets sound the tone 
instead of the selected 
announcement.

L

If you select “Once”, the setting 
changes to “Off” after the alarm 
sounds.

L

When the ringer volume for outside 
calls is set to off (page 24), the alarm 
sound is heard at a low level.

The handset can display the Internet 
address where you can download the 
operating instructions or get further 
information for this product by using your 
computer.

{

MENU} i {#}{6}{8}{0}

{

OFF}

Additional handsets
Up to 6 handsets can be registered to 
the base unit.
Important:
L

See page 6 for information on the 
available model.

The supplied handset and base unit are 
pre-registered. If for some reason the 
handset is not registered to the base 
unit, register the handset.

Handset:
{

MENU} i {#}{1}{3}{0}

Base unit:
■ KX-TG9361

Press and hold {LOCATOR} for 4 
seconds. (No registration tone)

■ KX-TG9371/KX-TG9372

Press and hold {LOCATOR} for 4 
seconds until the registration tone 
sounds.

L

If all registered handsets start 
ringing, press the same button to 
stop. Then repeat this step.

L

The next step should be 
completed within 90 seconds.

Handset:
Press {OK}, then wait until a long 
beep sounds.

{

OFF}

TG936x_OI.book  Page 29  Wednesday, January 2, 2008  9:12 AM