Panasonic KX-TG2700S User Manual

The unit does not work.

“No link to base.
Walk closer to 

base and try 

again.

” is displayed and

an alarm tone sounds.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

The handset and/or the
base unit does not ring.

The handset display is
blank.

•Check the settings (p. 11–12).

•Check whether the dialing mode setting is

correct (p. 16).

•Charge the battery fully (p. 12).

•Clean the charge contacts and charge again

(p. 13).

•Install the battery properly (p. 12).

•Unplug the AC adaptor to reset. Plug in, and

try again.

•The handset has not been registered to the

base unit. Register the handset (p. 21, 68).

•Re-install the battery (p. 66) and charge it

fully.

•You are too far from the base unit. 

Walk closer to the base unit and try again.

•Plug in the AC adaptor.

•Raise the base unit antennas.

•Locate the handset and the base unit away

from other electrical appliances (p. 3).

•Walk closer to the base unit.

•Raise the base unit antennas.

•Press 

Ü

on the handset to turn on the

Reception Booster feature (p. 24).

•The ringer volume is OFF. Set to HIGH or

MEDIUM or LOW (p. 19, 54).

•If more than 3 other users are using the

handsets and base unit, the handset/base
unit may not ring. Those users will hear
incoming call tones (p. 61) and the IN USE
indicator flashes quickly on the base unit.

•Charge the battery fully (p. 12).