Panasonic KX-TG5100M User Manual
Installation
12
Installing the Battery in the Handset
Insert the battery (
), and press it down until it snaps into the compartment (
).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 13). Close the cover and charge the handset for
about 6 hours.
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 13). Close the cover and charge the handset for
about 6 hours.
Battery Charge
Place the handsets on the base
unit and the charger and charge
for about 6 hours before initial
use.
unit and the charger and charge
for about 6 hours before initial
use.
• The unit beeps once, the
CHARGE indicator lights and
“Charging” is displayed.
“Charging” is displayed.
• When the battery is fully charged,
“Charge completed” is
displayed if there are no new calls
in the Caller List.
displayed if there are no new calls
in the Caller List.
Battery strength
You can check the battery
strength on the handset
display.
The battery strength is as
shown in the chart on the
right.
strength on the handset
display.
The battery strength is as
shown in the chart on the
right.
Display prompt
Battery strength
Fully charged
Medium
Low
(flashing) Needs to be recharged.
Discharged
1
2
1
2