Panasonic KX-TG5100M User Manual
Special Features
48
Using the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press [PAUSE/REDIAL] if a pause is required for dialing with a
PBX or to make a long distance call.
PBX or to make a long distance call.
Ex. Line access number [9] (PBX)
[9]
[PAUSE/REDIAL]
• Pressing [PAUSE/REDIAL] once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
• Pressing [PAUSE/REDIAL] more than once increases the length of the pause
between numbers.
FLASH Button
Pressing [FLASH/CALL WAIT] also allows you to use special features of your host
PBX such as transferring an extension call or accessing optional telephone
services such as call waiting.
PBX such as transferring an extension call or accessing optional telephone
services such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the
mute (p. 47).
Selecting the flash time (use either
or
)
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
• If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for the correct settings.
: Press [CONF/FUNCTION], and follow steps 2 to 5 above, using
the handset. Press the soft key (
), then press [OFF].
1
Press [FUNCTION/EDIT].
2
Scroll to “Initial setting” by pressing
[ ] or [ ], then press [ ].
[ ] or [ ], then press [ ].
3
Scroll to “Set tel line” by pressing [ ] or
[ ], then press [ ].
[ ], then press [ ].
4
Scroll to “Set flash time” by pressing [ ]
or [ ], then press [ ].
or [ ], then press [ ].
5
Select the flash time by pressing [ ] or [ ].
6
Press [ ] (Save), then press [STOP].
Handset Base Unit
Phone number
Handset Base Unit
Base Unit
Handset
Base Unit
▼
Initial setting
▼
Set tel line
▼
Set flash time
Set flash time
:700ms
▼
Handset
SA
VE