Panasonic KXTG9381T User Manual
Using Bluetooth devices
48
For assistance, please visit http://www.panasonic.com/help
Using a Bluetooth wireless
headset (optional)
headset (optional)
By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly.
unit, you can have a hands-free conversation
wirelessly.
Important:
L
Up to 2 headsets can be registered to the base
unit. However, only 1 Bluetooth headset can be
used at a time.
unit. However, only 1 Bluetooth headset can be
used at a time.
L
For best performance, we recommend using a
Bluetooth headset within 1 m (3.3 feet) of the
base unit. A headset can communicate with the
base unit within a range of approximately 10 m
(33 feet).
Bluetooth headset within 1 m (3.3 feet) of the
base unit. A headset can communicate with the
base unit within a range of approximately 10 m
(33 feet).
Registering a headset
1
Your headset:
Set your headset to registration mode.
Set your headset to registration mode.
L
Refer to your headset operating
instructions.
instructions.
2
Base unit:
{
{
MENU} i {#}{6}{2}{3} i {V}/{^}: “Add
new device
” i {SELECT}
3
Base unit:
Enter your headset PIN.
Enter your headset PIN.
L
Typically, default PIN is “0000”. Refer to
your headset operating instructions.
your headset operating instructions.
4
Base unit:
{
{
OK}
L
When registration is complete, ] is
displayed. You are ready to use the
headset.
displayed. You are ready to use the
headset.
Note:
L
When you register a 2nd headset, the 1st
registered headset is disconnected from the
base unit. To use the 1st registered headset,
change the headset connection. See “Changing
the headset connection (when 2 headsets are
registered)”, page 48.
registered headset is disconnected from the
base unit. To use the 1st registered headset,
change the headset connection. See “Changing
the headset connection (when 2 headsets are
registered)”, page 48.
Reconnecting a headset
If ] is not displayed even when the headset is
turned on, the headset has been disconnected
from the base unit. Reconnect the headset.
turned on, the headset has been disconnected
from the base unit. Reconnect the headset.
Important:
L
Make sure that the headset is turned on.
1
{
MENU} i {#}{6}{2}{3}
2
{V}
/{^}: Select the headset indicated by “Q”.
i {MENU}
3
{V}
/{^}: “Connect” i {SELECT}
L
] is displayed.
4
{
■} (EXIT)
Disconnecting a headset from the base unit
(when using a headset with another Bluetooth
(when using a headset with another Bluetooth
device)
To use your headset with another Bluetooth device
such as a cellular phone, you may need to
disconnect the headset from the base unit.
such as a cellular phone, you may need to
disconnect the headset from the base unit.
1
{
MENU} i {#}{6}{2}{3}
2
{V}
/{^}: Select the headset indicated by “Q”.
i {MENU}
3
{V}
/{^}: “Disconnect” i {SELECT}
L
] disappears from the display.
4
{
■} (EXIT)
Changing the headset connection (when 2
headsets are registered)
Only 1 headset can be used at a time. If the
headset you want to use is not connected to the
base unit, change the connection to that headset.
Only 1 headset can be used at a time. If the
headset you want to use is not connected to the
base unit, change the connection to that headset.
Important:
L
Make sure that the headset is turned on.
1
{
MENU} i {#}{6}{2}{3}
2
{V}
/{^}: Select the desired headset. i
{
SELECT}
L
The selected headset is indicated by “Q”.
L
] is displayed.
3
{
■} (EXIT)
[ Base unit
[ Base unit
[ Base unit
TG938x(e).book Page 48 Friday, July 3, 2009 10:10 AM