Panasonic KX-TG4394AL User Manual
Useful Information
41
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG4382/KX-TG4392/KX-TG4393/KX-TG4394
*2 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394
*2 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394
Display message
Cause/solution
Busy
or
System is busy.
Please try again
later.
Please try again
later.
L
The called handset
is in use.
L
Other units are in use and the system is busy. Try
again later.
again later.
L
The handset you are using is too far from the base
unit. Move closer and try again.
unit. Move closer and try again.
L
The handset’s registration may have been cancelled.
Re-register the handset (page 46).
Re-register the handset (page 46).
Check tel line
L
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 12).
connected yet or not connected properly. Check the
connections (page 12).
Don’t use this
battery.
battery.
L
A wrong type of batteries such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 5, 13.
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 5, 13.
Error!!
L
The handset’s registration has failed. Move the
handset and base unit away from all electrical
appliances and try again.
handset and base unit away from all electrical
appliances and try again.
Insert battery
L
The handset was placed on the base unit or charger
without batteries. Insert the batteries properly (page
13).
without batteries. Insert the batteries properly (page
13).
Invalid
L
There is no handset registered to the base unit
matching the handset number you entered.
matching the handset number you entered.
L
The handset is not registered to the base unit. Register
the handset (page 46).
the handset (page 46).
No link to base.
Reconnect AC
adaptor.
Reconnect AC
adaptor.
L
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
unit. Move closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
Reconnect the adaptor and try again.
L
The handset’s registration may have been cancelled.
Re-register the handset (page 46).
Re-register the handset (page 46).
Phonebook full
L
The phonebook memory is full. Erase unnecessary
entries (page 20).
entries (page 20).
Store VM access#
L
You have not stored the voice mail access number.
Store the number (page 36).
Store the number (page 36).
TG43xxAL(e)_OI.book Page 41 Friday, May 23, 2008 3:51 PM