Panasonic KX-TS880B User Manual

Page of 52
 27
For assistance, please visit http://www.panasonic.com/help
Voice mail service
Voice mail is an automatic answering 
service offered by your service 
provider/telephone company. After 
you subscribe to this service, your 
service provider/telephone company’s 
voice mail system answers calls for 
you when you are unavailable to 
answer the phone or when your line is 
busy. Messages are recorded by your 
service provider/telephone company, 
not your telephone. Please contact 
your service provider/telephone 
company for details of this service.
Listening to voice mail 
message(s)
The unit lets you know that you have 
new voice mail messages in the 
following way:
s “Voice mail” is displayed.
1
Lift the handset or press 
{
SP-PHONE}
 and dial an access 
phone number.
s You will get an access phone 
number from your telephone 
company.
2
Follow the pre-recorded 
instructions.
3
Press {SP-PHONE} if using the 
speakerphone.
s “Voice mail” will disappear from 
the display.
s If “Voice mail” still display after 
you have listened to your voice mail 
messages, press {PROGRAM/
EXIT
}
, and then press and hold 
{
CLEAR}
 and “Voice mail” will 
disappear.
Voice mail (VM) tone 
detection
Your service provider/telephone 
company sends special signals 
(sometimes called “voice mail tones” 
or “stutter tones”) to the unit to let you 
know  you have new voice mail 
messages. If you hear a series of dial 
tones followed by a continuous dial 
tone after lifting the handset, you have 
new voice mail messages. Soon after 
you hang up a call or after the phone 
stops ringing, your unit checks the 
phone line to see if new voice mail 
messages have been recorded.
Turn this feature off when:
s You do not subscribe to voice mail 
service.
s Your service provider/telephone 
company does not send voice mail 
tones.
s Your phone is connected to a PBX. If you 
are not sure which setting is required, 
contact your service provider/telephone 
company.
Turning VM tone detection 
on/off
The default setting is “On”.
1
{
PROGRAM/EXIT}
2
{
4} / {3}: “Program ?” 
> {OK}
3
{
4} / {3}: “VM tone detect ?” 
> {OK}
4
{
4} / {3}: Select the desired 
mode 
> {OK}
5
{
PROGRAM/EXIT}
Voice Mail Service
KX-TS880.book  Page 27  Friday, October 15, 2010  5:04 PM