Panasonic M7100 User Manual
Page 4 Enterprise Edge M7100 Quick Reference Guide
Setting up the telephone
Connecting the cords
ATTENTION Before attempting
to carry out any work on the
telephone, ensure that the line
cord is unplugged from the wall
socket.
to carry out any work on the
telephone, ensure that the line
cord is unplugged from the wall
socket.
To remove any of the cords,
squeeze the release latch on the
plug and gently pull the plug
from the socket.
squeeze the release latch on the
plug and gently pull the plug
from the socket.
Connect the handset cord to the
jack labelled with the telephone
icon and route the cord as
shown.
jack labelled with the telephone
icon and route the cord as
shown.
Route the line cord through the
stand and connect the cord to
the telephone jack that is
marked with the jack icon.
stand and connect the cord to
the telephone jack that is
marked with the jack icon.
Attach the stand using the slots
on the back of the telephone.
Once the above work is
complete, plug the line cord back
into its wall socket.
on the back of the telephone.
Once the above work is
complete, plug the line cord back
into its wall socket.
Connect to jack
from distribution block
Connect to receiver