Panasonic TG2382PW User Manual

Page of 80
47
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing
(FLASH/CALL!WAIT)
allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting. 
•Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing
mode or the mute (p. 46).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100
or 90 ms (milliseconds)”. Your phone comes from the factory set to “700 ms”. 
Make sure the unit is not being used and the handset is lifted off the base unit.
1
Press
(MUTE/FUNCTION)
and scroll to “Initial set” by pressing
Ö
or
Ñ
, and press 
á
.
2
Scroll to “Set tel line” by pressing
Ö
or
Ñ
, and press 
á
.
3
Scroll to “Set flash time” by pressing
Ö
or
Ñ
, and press 
á
.
•The current setting is displayed.
4
Select the flash time by pressing
Ö
or
Ñ
.
5
Press
á
(Save key).
•A beep sounds. 
•To exit the programming mode, press (OFF).
Set flash time
:700ms
GF
H
=Save
Set dial mode
H
Set flash time
Set line mode
Caller ID edit
H
Set tel line
Set answering
How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press 
(PAUSE/REDIAL)
if a pause is required for
dialing with a PBX or to make a long distance call.
Ex. Line access number 
(9)
(PBX)
(9)
\
(PAUSE/REDIAL)
\
•Pressing (PAUSE/REDIAL) once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
•Pressing (PAUSE/REDIAL) more than once increases the length of the pause
between numbers.
Phone number
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.